JGY transported this 2004 procharged 350Z to the shop for some dyno work and a motor build.

Another view of Jonathan's 350Z

Here's a view of the motor with the procharger.

The 350Z is on the dyno.

Even with two bad cylinders, here are the results of the dyno run. The Z made 303HP.

Some of the parts

The motor is almost out

The motor is now out

Starting the breakdown of the motor, we found two pistons ring lands were broken, which accounted for all the smoke.

Jonathan's 4 Evo Prosport gauges installed

Three angle valve job on the head, all new seals